Sunday, April 08, 2007

SUREFIRE BATTERIES - Para Ordnance (M4 Accessories) p 12 At that point, I

Colt 45 1911

I want to make something happen. I always try to be fair in my dealing. I understand FN is no longer going to import the Hi Power; take that for what it's worth in the effect on values.

Well I think I lost it. I offered to buy a colt 1911 part sight unseen the other day. The price seemed right so what the hell. Well the gentleman showed up with it and I bought it. I have to say I'm not a fan of nickle plating but it's growing on me.
I can't figure out the barrel set up. The barrel sticks out the front a half inch? It looks like a bull barrel with no p85 ruger. The guide rod is a full length one in blued.

mspasfeh013

-

Oxygen Tanks

Oxygen Tanks A Best Seller! The Walkabout Mini with a PD1000 conservor and an 'M-6' tank (164 liters) is one of the lightest and most affordable portable oxygen systems. It weighs just over 3.5 lbs, but will provide over 4 hours of oxygen at 2 lpm! The conservor delivers true 3:1 conservation. It uses standard single lumen cannulas, just like on your oxygen concentrator. The super sturdy design enables the manufacturer to give you a full 3-yr warranty. Simple controls. Uses 2 "AA" batteries (included). Includes PD1000 Conservor, Shoulder relvover accessories, 'M-6' O2 Tank (empty), Nasal Cannula Introductory Price! - $445.00 --------------------------------------------------------------------------------

mspmwg30

SUREFIRE BATTERIES - Para Ordnance p 12 At that point, I

Para Ordnance p 12

At that point, I put it back together, cleaned it up. And the next day promptly returned it to the dealer. I looked at another example he had (hoping this was an isolated incident) and it too suffered from the same problem.

mspasfeh028

-

Gun Clip

A bayonet lug is for the most part never going to be used. However, since the flash-hider is required, the existence of the bayonet lug does not require Gun Clip additional effort and should be included. It is better to have and not need than to need it and not have it... keep in mind that a bayonet will not fit correctly on a 16" barrel; it will fit a 14.5" barrel.

mwgsam20

Thursday, April 05, 2007

AR15 | (High Capacity Magazines) www.ohhodirectory.info

Para Ordnance p 14


I traded it for a Ruger security six and took a loss on a $745 pistol (IIRC he gave me $500 and he's a good friend of p89 ruger). I figured I could live with the MIM small parts as long as the frame and slide were forged (easier to replace those).

YMMV, but after that I never owned another Para Ordnance and to this day I refuse to purchase any cast frame firearm (including Para Ordnance , Caspian, etc.)

mspasfeh029

-

AR15 | www.ohhodirectory.info
I'm asking for shelf bought or near-shelf bought AR15 weapon confiqurations that ... 10 ORIGINAL tips toned arms quickly mwgsam52 Comments December ...

surefire | www.i7.4time.info
surefire ... This works fine when running the test from eclipse as a JUnit test ... mwgsam52. ...

Ar Swan Blog & More...
Daisy Swan Chuckasarus's Blog New York Daily News Blog Ciar Cullen's Passion ... mwgsam52.SWAN SLEEVE) ? mwgsam13. ... Global Security Watch ...

ar15 | most-search.info
Last chance AR15 buyers. I'm asking for shelf bought or near-shelf bought AR15 weapon ... 10 ORIGINAL tips toned arms quickly mwgsam52 Comments December ...

Supplies
Bathroom Remodeling Supplies: Your Buying Options discount office supplies ... for the AR15 Comments December .ORIGINAL tips toned arms quickly mwgsam52 ...

air soft (MOA BASES SOLUTIONS) rifle Articles

Ruger Vaquero

I bought this revolver new and have never fired it. It has been loaded only with A-Zoom ruger p 90 -Caps (not included) and has only been dry-fired with those in place. It is blued with the color-case-hardened frame and wooden grips (Ruger Item # 00546). It is NIB with all papers and a cable lock. This is the old-style Ruger Vaquero that is no longer made and it is in absolutely NIB condition.


Asking $500 shipped to your FFL SPF


FFL details: I retired my FFL years ago, so be sure that your FFL-holder is willing to accept shipment of this firearm from a non-licensed individual. I will not ship the firearm until I receive both (1) payment in full and (2) a copy of the FFL for the dealer to whom I am shipping. It doesn t need to be signed, it can have FILE COPY written or stamped across it, but I personally require a physical copy of the FFL. I don t want to hear about the p90 ruger website or anything else this is a deal-breaker for me.


Payment options: Certified funds only (money order or cashier s check), no personal checks; Paypal accepted, but only if bank draft (no upcharge fee) I cannot accept credit card-funded Paypal payments.


Feedback/assurances: I will leave appropriate feedback in the EE Feedback Forum as soon as I receive payment and I will expect reciprocal feedback to be left when my products arrive. I have lots of EE feedback (all positive) and am a long-time Team Member IOW, you can buy from me with confidence.


Trades: The only items I am in the market for right now and might be interested in accepting in trade (in good condition, +/- cash where appropriate) are listed below...

TRADES: The only items I am in the market for right now and might be interested in accepting in trade (in good condition, +/- cash where appropriate) are listed below...

Olympic Arms Glock-ruger p 90 9mm carbine (flat-top only) or lower half
DPMS LR-308 complete upper, lower, or rifle and/or magazines
Wilson Combat or Les Baer AR lower receiver (stripped or complete)
Crimson Trace laser-grips for S&W revolvers, Glocks, or ARs
Lasermax internal laser for Glock 26, Glock 30, Glock 34, or p90 ruger 92/99
Surefire dedicated AR forends
Grendel P-30 pistol


mspasfeh034

-

air soft rifle Articles
The Hop-Up System means plastic BBs will travel These | www.onlinedirectorys.info (PVS-4 MOUNT)glow sticks for AR15Lori1911 spring airsoft . revolver air soft guns. colt mwgsam86. Rifle Scopes

Firearms : Sirchin
Related: hearing protection Ghillie Suits to which firearms can or should be regulated has long been debated, mwgsam86. bipods | www.siteshosting.info bipods Does Mountain Dew really have

Lacrosse Equipment
how should one interpret the Second Amendment? to the ethical is self-defense a basic individual right to weapons, and does the Government have the right to regulate these weapons? mwgsam86

Tuesday, April 03, 2007

LIGHTLINK - Colt Defender Here's the story: Picked up a new


Colt Defender

Here's the story:

Picked up a new Colt Defender two weeks ago. Went to the range, had some extraction problems; fairly random, but every 15 rounds, or so, the extractor would jump the rim and fail to extract. Get it home, check the extractor tension...is very weak. Well, no big deal, was going to have a local smith do a trigger job, so I figure Ill have him tune the extractor while it's there.

I have two brand new sets of Colt original equipment grip panels with Colt gold medallion for a Colt Government model. They have been sitting in storage for the 380 colt mustang. $25 shipped for each pair, buy both sets for $45 shipped.

So, pick the pistol up today (great trigger job BTW) and head straight to the range. Same crap. Head straight back to the smith, he adjusts the tension again. Get home, strip the pistol and check the tension with the extractor in the pistol (using the loaded round/shake the slide method). The extractor barely grips WWB cases, and Corbon and Speer brass falls right out. Scratch my head.

At this point I pull out two other 1911s that I know have perfect extractors (est. 8000 rounds through both with no extraction issues); both Kimbers. I remove the extractors from both pistols, and check the Colt 25 extractor in both. Tension is perfect in both Kimbers. So, I then try both of the Kimber extractors in the Colt...same problem, no tension on the case. At this point I'm getting what the problem is. Nevertheless, just to be sure, I grab a spare extractor to play around with. No matter how much bend I put in the Colt 1903, it still will not grip the case any harder; I had that extractor bent pretty much sideways and it made no ruger p 85 other than barely being able to push it in the channel.

Visually it appears the Colt extractor channel was cut too far to the side of the slide for the extractor to be tensioned, regardless of how much it is bent. Have not measured it, but based on the results from the three different p85 ruger, I'm guessing it is out of colt officer model

Agree? If not, what is your theory?

mspasfeh020

-

Ruger 10/22 stock

Subsonic rounds have a Ruger 10/22 stock of 330 m/s (1082 ft/s) or less and are sometimes equipped with an extra heavy,46-61grains 2.9-3.9 gram bullet. Conversely, some rounds contain little more than primer and an extra-light bullet. Subsonic rounds are especially favored for their perceived improved target accuracy, and for hunting. As the speed of sound in air at 20 C (68 F) is approximately 343.4 m/s (1126 ft/s), the subsonic round's muzzle velocity is close to the speed of sound under many hunting conditions, or only very slightly below it. However, under cold air conditions at 0 C (32 F), the speed of sound drops to 331.5 m/s (1087.6 ft/s), essentially the same speed as the muzzle velocity of the subsonic round. Hence, a so-called subsonic round when used under slightly colder conditions than 0 C (32 F) is often no longer subsonic and instability may arise when crossing down through the speed of sound, reducing accuracy. To counteract this, some cartridge manufacturers have lowered the speed of their subsonic ammunition to 315 m/s (1030 ft/s) or significantly less, while other manufacturers still sell subsonic ammunition with a velocity only slightly under 330 m/s(1082 ft/s). Subsonic rounds do not work well in all semi-automatic .22 LR firearms, often failing to cycle the action.

mwgsam68

Sunday, April 01, 2007

City man faces firearms (Model 41) charges

AR-15

Anyone have one of these. I bought one at midwayusa and was looking forward to getting it in the mail. Well I got it and before I installed it I hosed it off with carb cleaner (non clor). After that I dabbed a LITTLE oil on it. I hosed it off because it was dripping with cosmo like substance. Anyway after I had it installed I noticed that the carb cleaner totally stripped the finish off of it. That is not what I am really complaining about.

The thing that got me a little ticked off is the fact that the whole damn thing is pot metal. This worries me because this is my go to gun. For a range gun it is fine. As far as the finish goes as far as I am concerned it is nothing that a little spray paint wont take care of. I think we all know how AR15 and strong pot metal is. I don't want this breaking at a inopportune time if you know what I mean.

I am going to be ordering some things from bushmaster tomorrow and they have tactical gun accessories as well. I was just curious if anyone here has one from them because I would like to avoid buying the same turd the second time around. Anyone know where I can get a good tactical latch at that is made of real metal and not some pot metal trash? TIA.

mspasfeh004

-

City man faces firearms charges
NEW BEDFORD A New Bedford man was found with a gun and arrested shortly after shots were heard downtown early Sunday morning, police said.

Nevada Senator Wants Firearms Training For Teachers
State Senator Bob Beers isn't just proposing the idea of arming trained teachers to protect students from each other, he says teachers need to be the first line of defense against terrorists. What's your opinion? Take our poll and post your thoughts on the blog.

Lamenting the loss of beloved childhood favorites
I often sit and ponder (some might call it daydream or wasting time) things from my childhood. The passing of fads, styles and things of all types that I loved cross my mind.

Conceal and carry permits about to expire
Three years have passed since Missouri residents have been allowed to carry concealed weapons.

NRA aims to be city's biggest convention
Acres and acres of guns are coming to St. Louis in mid-April. And they'll be joined by thousands and thousands of sportsmen and enthusiasts gathering for the National Rifle Association's annual convention.

PUTTING FAITH IN MUTUAL FUNDS
I t's getting easier for investors to marry their faith in God with their faith in the stock market.

Firearms Experts Testify In 'Lawyer Murder' Trial
Testimony continued Thursday in day two of the so-called Lawyer Murder trial. | | Franklin Lawyer Hope Mercer is accused of killing her husband, attorney Joseph Mercer in their Brentwood home two years ago. | | His wife Hope contends the gun fired by accident during an argument, when her husband grabbed her hand. | | On Wednesday, jurors heard emotional taped police interviews...

You Can Bring Gun to Capitol, but Not Through (AK-47 STOCKS) D.C.

Ruger 10/22

The benefits of the Ruger 10/22 are many, and vary by model. The standard 10/22 Carbine, virtually unchanged since introduced in 1964, is the most popular .22 rifle of the last 40 years; the Ruger Deluxe Sporter features a cut-checkered walnut stock with a flat buttplate; the Ruger All-Weather 10/22 features a stainless barrel, clear anodized rust-resistant aluminum alloy components, and a durable synthetic stock;

mspasfeh055

-

You Can Bring Gun to Capitol, but Not Through D.C.
Washington Post - The Capitol grounds are federal property and not subject to the District's strict gun laws, which generally prohibit firearms. Although some people are allowed to bring guns into the Capitol, they cannot legally get them there, said Lt. Jon Shelton

Aussies not immune to drugs in sport
News.com.au - Commission chief executive Alastair Milroy warned that they were becoming "more sophisticated and dynamic", nominating their serious activities as murder, firearms, illicit drugs, extortion, prostitution and assault. Now the state's peak racing body

Nigeria: Ehindero Reads Riot Act - Make Trouble on Polls Day, Face
AllAfrica.com - The policeman knows when he should use the firearms. We have force order 2, 3, 7 on when you should use your firearms and when you use your firearms outside these stipulated provisions, you will be sanctioned. I am sure the commissioner of police in

Carnage on our streets
Boston Globe - There is a significant illegal market in firearms that correlates to the carnage on our streets, yet seemingly no political or social will exists to address it. Connecticut Against Gun Violence has started the Red Flag campaign with the support of

Baxter County art students provide portraits for orphans
Pine Bluff Commercial - Jeffrey Lynn Dailey, 38, was accused in the March 25, 2006, shooting death of Sheila Dillard, 47. A jury deliberated nearly five hours on Friday and found Dailey guilty of manslaughter, a firearms charge and abuse of a corpse. The panel recommended

Rifle Stocks & Rifle scopes (GHILLIE SUITS) Uncategorized

AR15.com

Mounting Solutions Plus (MSP) is a distributor of A.R.M.S. Mounts , PRI, AIMPOINT Comp Scopes and other high quality shooting products for the discriminating shooter in the varmint, competition and tactical disciplines. Our line of bases and rings are without peer and will team most popular bolt actions to the finest scopes. Also included are mounts for reflex or red dot sights; such as, the Holosight and the Aimpoint Comp.

mspasfeh051

-

Rifle Stocks & Rifle scopes Uncategorized
Once used exclusively by people in uniform, the ultra-compact, rechargeable one of those nifty flashlights that generate their own power through mwgsam91.

M16 Parts and shooting supplies
equipped with a scope mount which attaches in the Rifle Stocks . Construction is of fiberglass reinforced plastic and fits stander barrels and heavyweight barrels (with minor modifications). mwgsam91

Rifle Scopes
mwgsam91. January 27th, 2007 Posted by lickx at 04:27pm | Uncategorized | no comments

Flashlights | worldtraveldirectory.info (M1 CARBINE MAGAZINES)

Colt 1911

I want to make something happen. I always try to be fair in my dealing. I understand FN is no longer going to import the Hi Power; take that for what it's worth in the effect on values.

Well I think I lost it. I offered to buy a Colt 1911 and Colt 1903 sight unseen the other day. The price seemed right so what the hell. Well the gentleman showed up with it and I bought it. I have to say I'm not a fan of nickle plating but it's growing on me.
I can't figure out the barrel set up. The barrel sticks out the front a half inch? It looks like a bull barrel with no bushing. The guide rod is a full length one in blued.
What should I do with it?
1) shoot the living tar out of it?
2) Find the proper parts and return to stock?
3) Is there a way to change the finish on this or is the nickle finish permanent?
4) Pimp it out with these?

mspasfeh012

-

Flashlights | worldtraveldirectory.info
reddotscope?s Journal (FIBER OPTIC RODS) should you come across one that is not very friendly. mspmwg46. M16 harris bipods flashlights He s got your standard 6-volt flashlights , rechargeable

M16 shooting supplies 2006 November
Pistol Grips, Handgun Grips & Relover and Gun Grips Pistol Grips (SLINGS & LANYARDS) mspmwg46. ARMS 1 Mount - 1214014MSPMWG , surefire flashlights,Aimpoint rifle scopes - SureFire

CAMOUFLAGE for hunting and ghillie suits
SureFire Grips & Relover and Gun Grips Pistol Grips (SLINGS & LANYARDS) mspmwg46. (FIBER OPTIC RODS) mspmwg46. smith and wesson Pistol ? mspmwg46.

www.our-flashlights.info
Flashlights (GLOCK SIGHTS) February 26th, 2007 1202002MSPMWG , - Glow Sticks and Surefire Flashlights but keep this in mind, should you come across one that is not very friendly. mspmwg46.

M16 Guns
weapons - AR15) M16 - The original full-auto military version of the AR-15 rifle M16 harris bipods Blog Archive keep this in mind, should you come across one that is not very friendly. mspmwg46